how to restore raspberry pi sd card from dmg file size

In case you have a wireless connection like Wi-Fi and gonna use that, you have to follow the below steps to configure the networks option on your Pi. Just connect your Pi to your home router and proceed with step 3. If you are gonna use a wired connection, this entire step 2 is optional. This step is completely optional depending on the type of network you are using. Click on Continue and you can now safely eject your microSD card from your computer.Once the flashing process is completed, you will see a window with a success message like this.It can provide write speed up to 170 MBPS) (If you need a higher read and write speed then you can consider getting a class A2 SD card. This may take some time, depending on the file size and write speed of your card. Then click the WRITE button to download the selected image and start the flashing process.

If you have multiple sd cards inserted, make sure that you have selected the right card before flashing.

Now click on CHOOSE SD CARD option, and select your SD card from the new menu that appears.

As I’m using a Raspberry Pi 4, here I’m selecting the Ubuntu 20.04 LTS (Pi 3/4) 64 bit for flashing. The supported models are shown inside parentheses like (Pi 3/4). Choose the image suitable for your Raspberry Pi model.

You will now see a list of Ubuntu images available for flashing.

This will open the menu for selecting the operating system that you need to install on your Pi.

Once done with the installation on your computer, launch the imager application and you will see an interface like this (Here I’m using Ubuntu OS on my computer).

You can do this on an Ubuntu computer by issuing the following command in the terminal.įor Windows download the exe file from here: imager_latest.exeįor Mac download the dmg file from here: imager_latest.dmg

You need to install a suitable Raspberry Pi Imager for your operating system.

First, insert the microSD card into your computer.

I highly recommend creating a full backup of all the data on your SD card. In this tutorial, we’ll be using the Raspberry Pi Imager.įlashing an image to an SD card is a destructive process and it will erase all the existing data. For this purpose, there are quite a few decent programs available free of cost. The first step in the installation process is flashing the Ubuntu image file to your SD card. Steps to Install Ubuntu on Raspberry Pi Step 1: Flash the Image to SD Card

MicroSD Card (8GB minimum, 16GB recommended).

Step 2: Configure the Network (Optional).

Steps to Install Ubuntu on Raspberry Pi.

How to restore raspberry pi sd card from dmg file size